Industry news
What to use to sterilize toys
time：2021-11-12 view count：623
What is the best way to disinfect toys?
What is the best way to disinfect toys: plastic toys
Washing with water, water is a neutral substance, and 70%-80% of bacteria can be washed away with water. Suitable for toys without circuits.
What is the best way to sterilize toys: rubber toys
There is a very troublesome problem with immersion disinfection, that is, every time the toy is washed or after the baby plays in the water, water will enter the toy, which is difficult to dry. Water left in the toy for a long time will inevitably breed bacteria. When the baby is playing with it, the water inside will flow out from time to time, and it will wet the babys clothes, which is unsanitary and troublesome. You can dig out the whistle at the bottom of the toy, squeeze out the water and put it back on.
What kind of disinfection is better for toys: plush toys, before cleaning, remove the stitches on the toy, take out the stuffing, and expose it to the sun. After the toy is dry, put the stuffing in and sew it up. Although this is a bit troublesome, it can prevent the filler from becoming mildewed, and using this method to clean it can also clean up those "black-hearted cotton" plush toys in time.
What kind of disinfection is better for toys: wooden toys are scrubbed with 3% Lysol solution or 5% bleaching powder solution, then rinsed with clean water and dried or sun-dried.
The better disinfection method of toys is ethylene oxide. After the toys are cleaned and dried, a large amount of bacteria will survive. It is difficult to eradicate the bacteria on the toys with other substances. For example, sterilization with medical grade ethylene oxide can completely eradicate the bacteria on the toy and make the toy sterile. Because medical devices sterilized by ethylene oxide can enter body surgery with confidence. In addition, ethylene oxide sterilization will not damage and change the properties of the toy. Of course, after the toy is sterilized, a forced parsing chamber must be carried out to deal with the residues remaining on the surface of the toy. It can be used only after it has reached the medical grade standard after being detected by gas chromatograph.
What is the best way to disinfect toys: plastic toys
Washing with water, water is a neutral substance, and 70%-80% of bacteria can be washed away with water. Suitable for toys without circuits.
What is the best way to sterilize toys: rubber toys
There is a very troublesome problem with immersion disinfection, that is, every time the toy is washed or after the baby plays in the water, water will enter the toy, which is difficult to dry. Water left in the toy for a long time will inevitably breed bacteria. When the baby is playing with it, the water inside will flow out from time to time, and it will wet the babys clothes, which is unsanitary and troublesome. You can dig out the whistle at the bottom of the toy, squeeze out the water and put it back on.
What kind of disinfection is better for toys: plush toys, before cleaning, remove the stitches on the toy, take out the stuffing, and expose it to the sun. After the toy is dry, put the stuffing in and sew it up. Although this is a bit troublesome, it can prevent the filler from becoming mildewed, and using this method to clean it can also clean up those "black-hearted cotton" plush toys in time.
What kind of disinfection is better for toys: wooden toys are scrubbed with 3% Lysol solution or 5% bleaching powder solution, then rinsed with clean water and dried or sun-dried.
The better disinfection method of toys is ethylene oxide. After the toys are cleaned and dried, a large amount of bacteria will survive. It is difficult to eradicate the bacteria on the toys with other substances. For example, sterilization with medical grade ethylene oxide can completely eradicate the bacteria on the toy and make the toy sterile. Because medical devices sterilized by ethylene oxide can enter body surgery with confidence. In addition, ethylene oxide sterilization will not damage and change the properties of the toy. Of course, after the toy is sterilized, a forced parsing chamber must be carried out to deal with the residues remaining on the surface of the toy. It can be used only after it has reached the medical grade standard after being detected by gas chromatograph.
